https://lenovopress. com/lp0651-thinksystem-raid-530-series-i nternal-raid-adapters ntroductionThe ThinkSystem RAID 530 family are entry-level 12 Gb SAS/SATA internal RAID adapters that offer a cost-effective RAID solution for small to medium business customers. These cacheless adapters support RAID levels 0/1/10/5/50, and include an extensive list of RAS and management features. The family is comprised of two adapter types:

• The ThinkSystem RAID 530-4i supports up to four internal SAS and SATA drives
• The ThinkSystem RAID 530-8i supports up to eight internal SAS and SATA drives

The ThinkSystem RAID 530-8i is shown in the following figure.
Figure 1. ThinkSystem RAID 530-8i PCIe 12Gb AdapterDid you know?Along with an extensive list of enterprise RAID capabilities, the RAID 530 Series adapters offer advanced drive diagnostic technologies. In the event of a physical drive failure, the drive is placed in a shielded state and the controller starts drive diagnostics to determine if the drive is indeed failed or can be restored. This saves time, money and server downtime associated with transient drive failures and unnecessary drive replacement. Part number informationThe following table provides the ordering part numbers for the adapters. Table 1. Part numbers and feature codesPart numberFeature codeDescription7Y37A01082AUNGThinkSystem RAID 530-8i PCIe 12Gb Adapter7M27A03918AUYRThinkSystem RAID 530-4i 2 Drive Adapter Kit for SN5507M17A03932AVECThinkSystem RAID 530-4i 4 Drive Adapter Kit for SN8504C57A16216AUYKThinkSystem SD530 HW RAID Kit (530-8i for SD530)The following figure shows the ThinkSystem SD530 HW RAID adapter.
Figure 2. ThinkSystem SD530 HW RAID adapterTechnical specificationsThe ThinkSystem RAID 530 Series internal RAID adapters have the following specifications:

• PCIe 3.0 x8 host interface
• 12 Gbps SAS/SATA RAID controllers, based on the Broadcom MegaRAID 9440 adapter family
• Cacheless (not upgradeable)
• Connectivity for up to 4, or 8 internal SAS or SATA drives
• Support for intermixing SAS and SATA HDDs and SSDs. Mixing SAS and SATA drives in the same array is not supported. Mixing of HDDs and SSDs in the same array is not supported.

• Support for intermixing of 12 Gbps and 6 Gbps drives.
• Support for RAID 0, 1, 10, 5, and 50 standard (The 530-4i supports only RAID 0, 1 in the SN550 and RAID 0, 1, 10, 5 in the SN850 because those blade servers only support two and four drives respectively)
• Support for JBOD (non-RAID) drive state
• Support for up to 64 virtual disks, up to 128 arrays, up to 16 virtual disks per array
• Support for logical drive sizes greater than 2 TB.
• Fixed 64 KB stripe size
• Supports 512e, 512n and 4K sector formatted drives
• Compliant with Disk Data Format (DDF) configuration on disk (CoD).
• S. M. A. R. T. support.
• Configuration through
  • XClarity Provisioning Manager UEFI interface
  • XClarity Controller web interface
  • XClarity Administrator Configuration Patterns
  • StorCLI command-line interface
  • LSI Storage Authority (LSA) GUI interface
  • UEFI Human Interface Infrastructure (HII)

Note: CacheCade is not supported by these adaptersThe following table compares the specifications of the RAID 530 internal adapters. Table 2. SpecificationsFeatureSD530 adapterRAID 530-4iRAID 530-8iPart numberFeature AUYK7M27A03918
7M17A039327Y37A01082Form factorCustomCustomPCIe low profileController chipLSI SAS3408LSI SAS3404LSI SAS3408Host interfacePCIe 3.0 x8PCIe 3.0 x8PCIe 3.0 x8Port interface12 Gb SAS12 Gb SAS12 Gb SASNumber of ports62 or 4†8Port connectors2x SlimSAS x41x Mini-SAS HD x4
(SFF-8643)2x Mini-SAS HD x4
(SFF-8643)Drive interfaceSAS, SATASAS, SATASAS, SATADrive typeHDD, SSDHDD, SED, SSDHDD, SED, SSDHot-swap drivesYesYesYesMax devices62 or 4†8RAID levels0, 1, 10, 5, 500, 1, 10, 5†0, 1, 10, 5, 50JBOD modeYesYesYesCacheNoneNoneNoneCacheVault cache protectionNoNoNoPerformance Accelerator (FastPath)NoYesYesSED support (SafeStore)YesYesYes† The 530-4i adapter for use in the SN550 blade server only supports RAID 0 and RAID 1 because the server has only two drives. The 530-4i adpater for use in the SN850 blade server only supports RAID 0, 1, 5 and 10 because the server has only four drives.  

Így is ismerheti: 7 Y 37 A 01082, 7 Y37 A01082, 7Y37A 01082

Galéria